Temporary Cone Strainer
Temporary Plate Strainer
TECHNICAL DATA
SAINATEC TYPE : ST-TMS
– Temporary Cone Strainer ST-TMSB
– Temporary Basket Strainer ST-TMSC
– Temporary Plate Strainer ST-TMSP
APPLICATIONS
Steam, water, oil or gas where protection from foreign matter in a pipeline is required. These strainers are installed between flanges for inexpensive protection of mechanical equipment
MATERIAL
Carbon steel – stainless steel and other alloys
PRESSURE RATING
ANSI 150,300,600,900
PN16-100
SIZES
1 ½” to 24” (DN40 to DN600)
FLANGE RATING
ANSI B16.5 Raised face , Flat Face
DIN 2533 -DIN 2543 -DIN 2544 -DIN 2545 (Available on request)
TEMPERATURE RANGE
20 TO 100 °C Larger Temperature Range is available upon request
SCREENS
Standard Screens are 316 stainless steel and are spot welded for maximum strength. Different size perforations and meshes are available in stainless steel, Carbon steel to meet specific media requirements
Mesh Size :
various sizes – please refer to mesh sizes table
INSTRUCTION
Temporary strainers are designed for protection of equipment and instrumentation during start-up periods. The strainer is usually installed between a set of flanges for an initial period after a new plant has been installed. Installation of a spool piece equal or more than the length of the strainer is recommended for ease of installation or removal.
There are three basic configurations of temporary strainers, namely the conical type, the basket type and the plate type. Standard construction is of perforated screen or single ply heavy wire mesh. Wire mesh liners can be added inside or outside of the strainer for finer straining capabilities. If a wire mesh is used, care must be taken to ensure that the direction of flow is against the wire mesh with the perforated metal as a back-up.